Description
More Stability and Better Rides
Your Talon is rugged and
it’s built for the off-road. If you want it to truly handle everything you
encounter, you need to upgrade to SuperATV’s High-Clearance 1.5” Forward
Offset A-Arms for the Honda Talon 1000X. They’re stronger, come with full
camber adjustment, and increase your wheelbase by 1.5 inches for more
stability and room for up to 34” tires. It’s a win-win.
Bigger Tires and Better Clearance
The 1.5” forward
offset gives you better tire clearance and room for up to 34” tires—all
without a lift! A longer wheelbase also makes you more stable over hills and
large obstacles. They make use of our unique dual-bend design to raise the
profile of these arms so they won’t get hung up on rocks and other trail
obstacles.
Superb Strength
Our beefed up 1.25”
diameter tubing is 25% larger than stock and results in much stronger control
arms. Ride hard and get wild. We want you to test the limits and ride with
confidence. With the strongest suspension you can get, nothing will stop you.
Plus, they’re backed by a lifetime warranty.
Adjustable Pivot Blocks
You get full adjustability
thanks to our adjustable pivot blocks. They come set to stock specifications
right out of the box, so you don’t have have to mess with them if you don’t
want to. But they let you tweak your camber to perfection if you bog down your
suspension with a bunch of cab weight or add a small camber-crippling lift.
You can dial it in so you don’t get any premature tire wear but you do get a
better ride.
Learn more about what camber
is, how it affects your ride, and how to adjust it perfectly. <!–
Clears 34” Tires
With a set of SuperATV 1.5” Forward
Offset A-Arms installed on your Honda Talon 1000X, you’ll have room to roll on
massive 34” tires without a lift. Our high-clearance A-arms are made with
heavy-duty 1.25” diameter steel tubing. The arched high-clearance design gives
you 1.5” of extra ground clearance over stock and the 1.5” forward offset
gives you a longer wheelbase for increased stability, better hill climbs, and
better performance overall.
Preadjusted for Fast
Install
Our High-Clearance A-arms for the 1000X feature
industry leading adjustable chromoly pivot blocks so you can get the camber
you want. Out of the box, your order comes preadjusted to factory specs and
ready to install. However, unlike others, SuperATV arms allow you to adjust
your alignment, so you can maintain perfect camber and eliminate premature
wear that can come from the addition of a lift kit or larger tires.
Chromoly Makes it Stronger
With chromoly steel
adjustable pivot blocks and ball joint housings, this A-arm’s most important
anchor points are bulletproof. We wanted to make sure these A-arms could take
you through every trail, every rock garden, and every rider mistake. We don’t
mess around, and neither should you.
Let SuperATV Do the
Work – Preassembly Available!
Want more time on the trails and
less time in the garage? Purchase a set of SuperATV ball joints and we will
install them for you. You save money and time. No need to buy a press, or
remove your old ball joints, and press them back in. We’ll do all the work for
free!
The best part? This saves you considerable time and money!
And, the labor is on us! We do it because we want you on the trail, not in the
garage.
Choose the Right Ball Joint
Each
Super Duty and Heavy-Duty ball joint comes with an easily accessible grease
zerk and an adjustable steel on steel design. You can easily keep our ball
joints maintained and flexible. At SuperATV, we understand the importance of
strength and longevity.
Super Duty 300M Ball
Joint
300M grade steel is the strongest ball joint material on
the market. We took that material and combined it with our superior design
engineering to make the strongest stud possible. That means minimal narrowing
at the neck and an adjustable stud. At 2.25x stronger than stock, you can’t
buy a stronger ball joint than SuperATV’s super duty 300M ball joint.
Heavy-Duty Ball Joints
Our heavy-duty ball
joints are designed with ultimate performance and convenience in mind. Whether
you’re doing flips or chasing hills, our proprietary blend of hardened 4340
VAR steel and zinc plating means this ball joint can take it. Our tests show
that our ball joint can take double the pressure of an OEM ball joint!
NOTE: You must re-use your stock ball joints if you
don’t select preassembly. –>
FEATURE
- Adds 1.5” of forward offset
- Fit up to 34” tires*
- 1.5” tubing is 25% larger than stock
- Adjustable lower pivot
block for full camber adjustability - Utilizes stock A-arm
bushings - UV-resistant powder coat finish
- Easy to
install - Includes bushing removal and insertion tool
- Backed
by a lifetime warranty
<!–
- 1.5” forward offset
- Fit up to a 34” tire (up from 29” stock)
- 1.25” diameter steel
tubing - 1.5” of extra ground clearance
- Chromoly steel pivot
blocks and ball joint housings - Pre-adjusted pivot blocks for easy
install - UV-resistant powder coat finish
- Includes bushing
removal and insertion tool - Backed by a lifetime warranty!
–>
Fitment
- Honda Talon 1000X : 2019+
- Honda Talon 1000X-4 : 2020+
Additional information
| Need Preinstalled Joints? | Heavy-Duty 4340 Chromoly Steel, I will do the work myself and reuse existing, Super Duty 300M |
|---|
