Polaris RZR XP Sidewinder A-Arms—1.5" Forward Offset

Description

Strong and Good-Looking—A Perfect Combo
Your Polaris RZR
XP is one badass rig—but you know it’s capable of more. Turn heads with
SuperATV’s Polaris RZR XP Sidewinder A-Arms. Their eye-catching good looks
make them the perfect upgrade for your favorite toy. But they don’t just look
good. Sidewinder A-Arms give you 1.5” forward offset and room for 35” tires.
And the high-clearance bend gives you 1.5” of extra ground clearance. Even the
nastiest ruts and washouts will feel like nothing more than a bump in the road
with these beefy boxed A-arms.

• Fits 35” tires without a lift
• Bend design gives 1.5” of additional clearance
• Boxed tubing
  design with 1/8” advanced steel plating
• 1.5” offset improves
  stability

Tapered Boxed Design
Lots of
A-arms are big and beefy, but very few look this good. Their tapered, boxed
construction and flashy SuperATV nameplate make them insanely impressive.
You’ll have everyone on the trail asking, “Where’d you get those awesome
A-arms?”

Fit up to 34” Tires without a Lift
Our clever high-clearance bends give you 1.5” more ground clearance than
stock. Extra clearance gives you a smoother ride by helping you avoid
obstacles. And the 1.5” forward offset gives you room for bigger tires too—up
to 35” without a lift. With bigger tires and an extended wheelbase, you get
greater stability too. These A-arms do so much more than just look good. They
make your RZR more capable on all terrains.

Strength You Can
Brag About
We’ve said it again and again, but Sidewinder A-Arms
are BEEFY. They’re made with 1/8” advanced alloy steel plating. It’s even
stronger than chromoly steel with an unbeatable strength-to-weight ratio. It’s
like armor against trail hazards and nasty hits. And we include high-quality
UHMW bushings at no extra cost. They’ll last basically forever thanks to the
low-wear and self-lubricating characteristics of UHMW. We’ve lab and field
tested these A-arms to ensure they’re as strong as possible. Plus they’re
powder coated to resist rust and corrosion.

We’re so confident in
Sidewinder A-Arms that we back them with a lifetime warranty!

Adjustable Pivot Blocks for Camber Control
Our
adjustable pivot blocks give you total control of your camber. Why does that
matter? They come set to stock dimensions, but if you add a lift or enough
weight to compress your suspension, you can mess up your camber. Bad camber
leads to worse control and premature tire wear. Adjustable pivot blocks help
you keep everything perfect.

Let SuperATV Do the
Work—Preassembly Available!
Want to spend more time on the
trails and less time in the garage? Purchase a set of SuperATV ball joints
with your RZR 1000 boxed A-arms and we’ll install them for you for free! We
save you money and time so you can get back to doing what you love.

NOTE: You must re-use your stock ball joints if you don’t
select a pre-installed ball joint at checkout.

Super Duty
300M Ball Joints
We took the strongest ball joint material on
the market—300M grade steel—and combined it with our superior design
engineering to make the strongest ball joint on the market. It comes with an
easily-accessible grease zerk and an adjustable steel-on-steel design, making
it easy to keep your ball joints maintained and flexible. At 2.25x stronger
than stock, you won’t find a better ball joint.

Keller Ball
Joints
Keller Ball Joints use a two-piece design that eliminates
the need for a snap ring. They thread onto your A-arms like a nut and bolt,
which makes these ball joints virtually impossible to pull out. The high-
quality chromoly steel stud combined with an advanced tool-steel body makes
them perfect for bigger machines, bigger tires, and bigger rides. And since
they’re greaseable and rebuildable, you can keep them running perfectly.

Heavy Duty Ball Joints
Our heavy-duty ball joints
are designed with ultimate performance and convenience in mind. Whether you’re
doing flips or chasing hills, our proprietary blend of hardened 4340 VAR steel
and zinc plating means this ball joint can take it. Our heavy-duty ball joints
also come with easily-accessible grease zerks and an adjustable design.
Extensive lab and field testing shows that our heavy duty ball joints can
withstand double the pressure of an OEM ball joint!

Standard
Duty Ball Joints
SuperATV’s standard replacement ball joints
give you OEM quality without the OEM price! They’re made with hardened
chromoly steel studs and housings—all zinc plated—for superior strength and
longevity. All of this delivers a ball joint that’s as strong as or stronger
than stock.

FEATURE

• Unique tapered design for a sleek, stylish look
• Adds a 1.5”
  forward offset
• Adds 1.5” of ground clearance
• Fit up to 35”
  tires
• Made with 1/8” advanced alloy steel plating
• Adjustable
  upper pivot block for full camber adjustability
• Includes high-quality
  UHMW bushings at no extra cost
• UV-resistant powder coat finish
• Easy to install
• Backed by a lifetime warranty

Fitment

• Polaris RZR XP : 2024+
• Polaris RZR XP 4 : 2024+

NOTE:

• Mud scraper must be removed if running Keller
  Ball Joints in upper A-arms
• Max tire size is 34” with SuperATV Bumper
  installed