Description
Ride All Winter Long
You need SuperATV’s Cab Heater
because your Honda Pioneer 1000 is made to ride in the winter even if you’re
not. It draws engine heat directly from the coolant lines to heat your cab
just like a traditional car heater. Install is easy—we include hoses, drill-
bits, and Pioneer-specific mounting plates to make it as easy as possible to
get your heater up and running. With the unit mounted between the seats under
the dash, you get balanced cab heating right where you want it. With
adjustable temperature, and adjustable fan speeds, winter might just become
your favorite time to ride.
Defrost Your Windshield
Along with the two vents in the unit itself, we include two defrost vents
and hoses to keep your windshield snow, ice, and fog free while you’re
driving! We route the defrost vents through your dash, so they look like they
came included from the factory.
Keeps Your Cab
Comfortable
Our Cab Heater is designed to make your cab
comfortable while you’re riding. The high-grade radiator hoses are rated from
-40°F to 285°F. That means that no matter how hot your engine gets or how cold
it is outside our heater and its components can handle it. Our heater doesn’t
just make you more comfortable—it makes your winter better.
Get Faster Heat with a Quick-Start Flow Valve
Halve
warm-up time and optimize your heater’s performance with a quick-start flow
valve. It diverts all engine coolant directly to your heater core during low
engine temperatures. The valve automatically opens at higher temps to send
coolant to your radiator too.
Get Hot Air in as Little as 30
Seconds with an Idle Flow Pump
Get heat to your cab faster with
our idle flow pump—it takes as little as 30 seconds! It keeps the coolant
moving, even when you’re going slow or at idle, so your heater can blow hot
air fast.
| Quick-Start Flow Valve | Idle Flow Pump |
| Gets you heated air twice as fast | Warms up heater in under 30 seconds |
| Diverts coolant to your heater core at low temps |
Actively pumps coolant at idle to increase heater temps |
| Combine our Quick-Start Flow Valve and Idle Flow Pump for maximum heat as quickly as possible when you’re slow or idle. |
|
Need More
Protection?
Get the most out of your cab heater by completely
sealing your UTV’s cab with our full doors, roof, and front and rear
windshields. Check out SuperATV’s full line of Honda Pioneer Windshields.
NOTE: Drilling through plastic and firewall required. All
necessary bits are included.
FEATURE
- Adjustable temperature and fan speeds
- 360° adjustable
vents - High-grade radiator hoses—rated -40°F to 285°F
- Includes defrost hoses and vents
- Draws 3.4 amps at 13.7 volts at
full fan speed - Capable of 14,600 BTU at 135 CFM
- Built-in
shutoff valve - Easy install—includes all installation hardware and
instructions - Heater control box measures 10″ x 4.5″ x 11.75″
- Add a quick-start flow valve and an idle flow pump to get heated air
faster
Fitment
- Honda Pioneer 1000 : 2016+
- Honda Pioneer 1000 Deluxe :
2016+ - Honda Pioneer 1000 Limited Edition : 2017+
- Honda
Pioneer 1000-5 : 2016+ - Honda Pioneer 1000-5 Deluxe : 2016+
- Honda Pioneer 1000-5 Limited Edition : 2017+
- Honda Pioneer 1000-6
: 2023+
NOTE: Limited Edition models will
require lower dash storage unit to be removed or modified.
Additional information
| Select Year | 2016-2022, 2023+ |
|---|---|
| Add Quick-Start Flow Valve? | No thank you, Yes please! |
| Add a Idle Flow Pump? | No thank you, Yes please! |
