Polaris Ranger 1000 Atlas Pro 2" Forward Offset A-Arms

Description

Upgrade Your Stock A-Arms with Optional Heim Joints
Bigger tires, more stability, and stronger suspension mean you can do more and
play harder in your Ranger 1000. That’s what you git when you install
SuperATV’s Polaris Ranger 1000 Atlas Pro 2″ Forward Offset A-Arms. They’re
like nothing you’ve seen before—they’re 0.5″ larger than your stock A-arms and
0.25″ larger than our standard rear offset A-arms. Our tubing is huge—1.5” in
diameter. And you get a 2” forward offset for more stability and the room to
run 33″ tires in the front. Plus, you have the option to add heims to handle
massive lifts, big portals, and nasty bounty holes.

Bigger
and Better with Atlas Pro Tubing
Go ahead and list all the
things you can do with bigger and stronger A-arms. Now do them. Thanks to our
clever design, the tubing for these bad boys measures 1.5″ in diameter with
walls .183” thick. This gives you the strength and stability for those hellish
rides with the boys. And if an increase in size wasn’t enough, we’ve powder
coated them for added durability. So get on it, and knock one of your “to-dos”
off your list.

We’re so confident in our A-arms that we’re selling
them with a lifetime warranty. So ride how you want, knowing we’ve got your
back.

A Forward Offset Adds More Stability
The
sky is the limit—these Polaris Ranger control arms give you an additional 2”
of ground clearance. With 2” of added height added to your machine, you can
roll over the logs, stumps, and boulders that you used to avoid. And they come
with a 2” forward offset, increasing your wheelbase by moving the ball joint
2” forward. Plus, the 2” offset allows you to run 33” tires without adding a
lift kit.

Optional Adjustable Pivot Blocks
Our
high-clearance A-arms also come with adjustable pivot blocks, allowing you to
change your camber. Paying attention to camber is very important when adding a
lift kit or larger tires. You’ll want to adjust it to eliminate premature tire
wear. We take it one step further by pre-adjusting your pivot blocks to match
your machine’s stock specifications, so you don’t have to mess with it if you
don’t want to.

Optional Double Heim Joints
Add
our heim joints if you want to run the biggest, baddest machine on the planet.
They have a 3/4” bore and 7/8” threads for ultimate strength. Take on harder
challenges with the biggest lifts and portals on the planet with these bounty-
hole certified heims.

Includes a Bigger, Better Tie Rod
Kit
The massive, offset tubes on these control arms need a
beefier solid steel tie rod kit with the strength and length you need to match
your Atlas Pros. These rods use chromoly tie rod ends that can handle some
seriously hard riding and rough terrain. The heims are tough as nails, so you
can get down and dirty without worrying about busting your ride.

Let SuperATV Do the Work—Preassembly Available!
Want to
spend more time on the trails and less time in the garage? Purchase a set of
SuperATV ball joints with your A-arms, and we’ll install them for you for
free! We save you money and time so you can get back to doing what you love.

NOTE: You must re-use your stock ball joints if you
don’t select a pre-installed ball joint at checkout.

Heavy
Duty Ball Joints
Our heavy-duty ball joints are designed with
ultimate performance and convenience in mind. Whether you’re doing flips or
chasing hills, our proprietary blend of hardened 4340 VAR steel and zinc
plating means this ball joint can take it. Our heavy-duty ball joints also
come with easily-accessible grease zerks and an adjustable design. Extensive
lab and field testing shows that our heavy duty ball joints can withstand
double the pressure of an OEM ball joint!

Super Duty 300M
Ball Joints
We took the strongest ball joint material on the
market—300M grade steel—and combined it with our superior design engineering
to make the strongest ball joint on the market. It comes with an easily-
accessible grease zerk and an adjustable steel-on-steel design, making it easy
to keep your ball joints maintained and flexible. At 2.25x stronger than
stock, you won’t find a better ball joint.

FEATURE

• Adds 2” of forward offset
• Fit up to 33” tires
• Made
  with 1.5” x .138” wall steel DOM tubing
• 0.5” larger than
  stock
• 0.25” larger than our standard High-Clearance 2″ Forward Offset
  A-Arms
• Adjustable pivot blocks for full camber
  adjustability
• Utilizes stock A-arm bushings
• UV-resistant
  powder coat finish
• Easy to install
• Backed by a lifetime
  warranty

Fitment

• Polaris Ranger 1000 : 2021+
• Polaris Ranger 1000 Crew :
  2021+
• Polaris Ranger 1000 Premium : 2022+
• Polaris Ranger
  1000 Crew Premium : 2021+