Description
Gen 3 Portals are Geared for All
SuperATV’s GDP 4”
Portal Gear Lift for the Polaris RZR 570 is Geared for All. What do we mean by
that? Our 4” portal lift is available with 15% or 30% gear reductions. You can
get exactly what you need for your riding lifestyle.
Perfect for Mud
Get a 30% gear reduction and start
flingin’ mud. With a massive boost to torque, you can turn bigger tires that
chew through the thickest bounty holes. When you gear down and go big, your
machine will turn into a mud monster. Plus, with a 30% gear reduction you can
still ride it on the road and tear up trails and rocks.
Perfect for the Rocks
Put 4” portals and a 30% gear
reduction on your machine and get the torque you need crawl over rocks like
they’re not even there. You’ll have the clearance to get over anything without
scratching up your skid plate, and you’ll have room to run bigger tires. These
portals are built for boulders.
Perfect for
Trails
Get 4” portals and a 15% gear reduction on your Polaris
RZR 570 and take on the trail less-traveled. You’ll keep that high speed and
leave your friends in the dust when you hit a hill or washout. It’ll bring out
your UTV’s full potential.
Learn more about how tire size and gear
reduction can unleash your machine’s potential.
Better
Gears
Our gears are precision ground and made with 9310 billet
steel alloy for high strength and high speed. That means they’re cool and
quiet even when you’re hammering down the throttle on the road, and they have
strength to withstand every ride.
Stronger Housings by
Design
We make our housings stronger by design. We know what
makes a portal box break and what doesn’t. Whether you choose cast aluminum
housings or USA-made 6061 billet aluminum housings with a gorgeous finish you
can only get with CNC machining, you know you’re getting the strongest boxes
in the business—they’re built with experience. And they’re built with
confidence.
- Our housings are reinforced in all the right places
- They’re built with better oil flow and gearing forces in mind
- There are no gimmicks and no vents because vents do more harm than good—we
know because we tested them
Advanced Gaskets and
Seals
Whether you go with cast or billet, both housings use:
- Advanced gaskets with excellent oil resistance and a lower
deterioration rate than Kevlar gaskets - A sealed input gear and
double-lipped output seal - 100% sealing coverage throughout so you can
forget about oil leaks
Top-Rated Customer
Service
Still need a little help getting exactly what you
need? We’ve got a dedicated team just for portal support. Give us a call so we
can get the perfect set of portals in your hands today.
| Polaris RZR 570 Portal Gear Reduction Recommendations |
||
|---|---|---|
| Tire Size | Required Suspension Setup with 4″ Portals | Recommended 4″ Portal Gear Reduction |
| Up to 26″ |
Stock | 15% |
| 27″-29″ | 1.5″ Forward Offset A-Arms |
15% |
| Gear reductions listed are general guidelines to maintain factory top speed. Installing a larger than recommended gear reduction will result in extra torque and lower top speed. Give us a call for more information. |
||
Patent # 11,299,042
FEATURE
- Available with billet or cast aluminum housing
- Cool, quiet,
precision ground gears made from 9310 alloy billet steel - Increases
width by 4 in. per side (8 in. total) - 1.5 in. diameter 4340 hardened
steel drive shaft - No leak bearings and seals
- Universal hub
fits all major bolt patterns - Comes complete with all hardware,
backing plates, brakes lines and instructions
Wheel
Requirements:
- 14” or larger wheel required
- Cannot
exceed 5” backspacing - Not compatible with dual beadlock wheels
Fitment
- Polaris RZR 570 : 2012+
- Polaris RZR 570 SuperATV S
Conversion : 2012+
NOTE: Wheels need to have a
center hole of at least 3.25″ (82.55mm) or require a 1” wheel spacer.
Additional information
| Model | RZR 570, RZR 570 with SuperATV S Conversion |
|---|---|
| Portal Housing Material | Billet, Cast |
| Portal Gear Reduction | 15%, 30% |
