Description
Gen 3 Portals are Geared for All
SuperATV’s GDP 6”
Portal Gear Lift for the Polaris RZR 800 gives you a lift and a gear reduction
in one box. Get the clearance to run bigger tires and the torque you need to
turn them. The lift and gear reduction are in the hub which means they
maintain suspension geometry and reduce drivetrain stress. Customize by
choosing between a 30% or 45% gear reduction and selecting a cast or billet
aluminum housing. GDP portals are truly geared for all. See what customer Goose Bellows has to say about our
6” portals on his Instagram famous Can-Am Maverick XRS, aka Lil Buckin’ Crazy.
45%–Perfect for Mud
Install big 6”
portals with a 45% gear reduction to get clearance for huge tires and a
massive boost in torque. It’ll turn your monster tires like they’re stock and
take your RZR through the biggest, thickest mud holes you can find. These
portals are built for performance — just see how far you can send mud flying.
45%–Perfect for Rocks
A 6” portal box
with a 45% gear reduction gives you tons of torque to crawl over any rock or
boulder you can find. With that much power, rock shelves will feel like speed
bumps and boulders feel like pebbles. With 6” of clearance, you can run bigger
tires and dominate nastier rock gardens.
30%–Perfect for
Everything
A 30% gear reduction lets you turn bigger tires and
gives you the versatility to run mud, dominate trails and hills, and maintain
high speed on the road. It gets your power to the ground to make your UTV more
capable no matter where your adventures take you.
Learn more
about how tire size and gear reduction can unleash your machine’s potential.
Better Gears
Our gears are precision
ground and made with 9310 billet steel alloy for high strength and high speed.
That means they’re cool and quiet even when you’re hammering down the throttle
on the road, and they have strength to withstand every ride.
Stronger Housings by Design
If you’re looking for the
strongest gear boxes you can get, look no further. We make our gear boxes by
design, and the hundreds of thousands of ride hours prove that our housings
have what it takes to go hard. Whether you want a gorgeous, USA-made billet
aluminum housing or a cast aluminum housing, you know you’re getting stronger
housings made with unmatched experience.
- Our housings are reinforced
in all the right places - They’re built with better oil flow and
gearing forces in mind - There are no gimmicks and no vents because
vents do more harm than good—we know because we tested them
Advanced Gaskets and Seals
Whether you go with cast or
billet, both housings use:
- Advanced gaskets with excellent oil
resistance and a lower deterioration rate than Kevlar gaskets - A
sealed input gear and double-lipped output seal - 100% sealing coverage
throughout so you can forget about oil leaks
Top-
Rated Customer Service
Still need a little help getting
exactly what you need? We’ve got a dedicated team just for portal support.
Give us a call so we can get the perfect set of portals in your hands today.
Polaris RZR 800 Portal Gear Reduction Recommendations |
||
---|---|---|
Tire Size | Required Suspension Setup with 6″ Portals |
Recommended 6″ Portal Gear Reduction |
Up to 34″ | 5″ Lift Kit | 30% |
Up to 34″ | 6″ Lift Kit | 30% |
Polaris RZR S 800 Portal Gear Recommendations | ||
Up to 32″ | 5″ Lift Kit | 30% |
Polaris RZR 4 800 Portal Gear Recommendations |
||
Up to 34″ | 5″ Lift Kit | 30% | Gear reductions listed are general guidelines to maximize torque and maintain factory top speed. A larger than recommended gear reduction will result in more torque and lower top speed. Give us a call for more information. |
Patent # 11,299,042
FEATURE
- Available with billet or cast aluminum housing
- 9310 alloy
billet steel precision ground gears are cool and quiet - Increases
width by 4 in. per side (8 in. total) - 1.5 in. diameter 4340 hardened
steel drive shaft - No leak bearings and seals
- Universal hub
fits all major bolt patterns - Comes complete with all hardware,
backing plates, brakes lines and instructions
Wheel
Requirements:
- 18” or larger wheel required
- Wheels
cannot exceed 5” backspacing
Fitment
- Polaris RZR 800 : 2008-2014
- Polaris RZR 4 800 :
2010-2014 - Polaris RZR S 800 : 2009-2014
NOTE: Wheels need to have a center hole of at least 3.25″
(82.55mm) or require a 1” wheel spacer
Additional information
Model | RZR 4 800, RZR 800, RZR S 800 |
---|---|
Portal Housing Material | Billet, Cast |
Portal Gear Reduction | 30%, 45% |