Polaris RZR 800 High Clearance 1.5" Forward Offset A-Arms

Description

Get Room for Bigger Tires
You want bigger tires to
tackle bigger obstacles, but you don’t want a lift that’s hard to handle and
makes you feel unstable. You need SuperATV’s High-Clearance 1.5” Forward
Offset A-Arms for your Polaris RZR 800. They increase your wheel base by 1.5
inches, so you get more stability, room for up to 29.5” tires, and more
strength than stock. It will make your ride better.

More
Clearance—No Lift Required
The dual-bend design of our A-arms
gives you 1.5 inches of additional ground clearance so you can cruise over
obstacles easily. But they also have a 1.5” forward offset which gives you
clearance for 29.5” tires. That longer wheelbase gives you increased stability
on hills and other big obstacles. Upgrading to that tire size gives you even
more ground clearance and enables some wild off-road action.

Made Stronger
We don’t mess around when it comes to
strength. Our arms are made with 1.25” diameter steel tubing. That’s 25%
larger than stock and gives it a huge boost in strength. All around, these
A-arms are made to ride hard for years.

Adjustable
Camber
These A-arms come with adjustable pivot blocks that are
set to factory specs out of the box. If you don’t want to mess with them, you
don’t have to. But if you add weight to your cab or get a small lift, they
give you the ability to adjust your camber for a better ride and less
premature wear.

Learn more about what
camber is, how it affects your ride, and how to adjust it perfectly.

Let SuperATV Do the Work – Preassembly Available!
Minimize downtime and get riding quicker by ordering a set of SuperATV ball
joints with your A-arms. We’ll install them free of charge so you’ll save time
and money. You’ll spend less time in the garage and more time behind the
wheel.

NOTE: You must re-use your stock ball
joints if you don’t select a pre-installed ball joint at checkout.

Super Duty 300M Ball Joints
We combined unbeatable
300M alloy steel with our advanced ball joint design to bring you the
strongest ball joint you can get. They’re adjustable and serviceable so you
can can maintain your preferred stud stiffness for years of use. Altogether
it’s 2.25 times stronger than stock, so it won’t break under stress. It can’t
be beat.

Keller Ball Joints
Keller Ball
Joints use a two-piece design that eliminates the need for a snap ring. They
thread onto your A-arms like a nut and bolt, which makes these ball joints
virtually impossible to pull out. The high-quality chromoly steel stud
combined with an advanced tool-steel body makes them perfect for bigger
machines, bigger tires, and bigger rides. And since they’re greaseable and
rebuildable, you can keep them running perfectly.

Heavy Duty
Ball Joints
Our heavy-duty ball joints are no pushover.
They’re made with 4340 VAR steel and zinc plated to make them strong and
durable. The adjustable housing allows you to maintain the perfect stiffness
in your ball joint even after years of wear. It’s also easily greasable so you
can keep it running smooth. It’s a long-lasting ball joint that’s built for
action.

Standard Duty Ball Joints
Standard duty ball joints give you OEM quality without the OEM price. The
hardened chromoly construction is zinc plated for strength and longevity. The
result is a high-quality ball joint that’s as stronger or stronger than stock.

<!– Get the most out of your RZR with SuperATV's maximum
clearance forward A-arms. Get an additional 1.5" of clearance without adding a
lift kit! Backed by a lifetime warranty and featuring 25% larger tubing, our
unique dual bend design forward control arms are carefully crafted to maintain
factory steering geometry. What does that mean for you? No added wear and tear
on important components such as axles and tie rods! To give your machine the
ultimate clearance pair with 2-3" lift kit.

Industry Leading
Adjustability
SuperATV A-Arms feature the industry leading
adjustable upper ball joint allowing for full camber adjustment. Unlike
others, our arms allow you to custom tailor your ride to fit your individual
needs. Add a lift, new shocks, or larger tires and eliminate premature tire
wear, often caused by misalignment, and keep the ride quality you want.

All-Inclusive Kit
SuperATV provides an all-
inclusive kit containing extended tie rod ends ($50 value). As you move your
A-arms forward, you also need to adjust the toe on your steering rack. Don’t
be fooled by spacer or shock relocation kits, the only way to correctly
utilize full thread engagement and maintain factory steering alignment is to
use our extended tie rod ends. They are an invaluable feature that also gives
you the capability to optimize your alignment after the addition of a lift kit
or different suspension. A Steering Stop Kit ($24.95 value) is added as well
to prevent over steering which would create unneeded bind on your axles.

Let SuperATV Do the Work – Preassembly Available!
Want more time on the trails and less time in the garage? Purchase a set of
SuperATV ball joints and we will install them for you. You save money and
time. No need to buy a press, or remove your old ball joints, and press them
back in. We’ll do all the work for free!

The best part? This saves
you considerable time and money! And, the labor is on us! We do it because we
want you on the trail, not in the garage.

Choose the Right
Ball Joint
Each Super Duty and Heavy-Duty ball joint comes with
an easily accessible grease zerk and an adjustable steel on steel design. You
can easily keep our ball joints maintained and flexible. At SuperATV, we
understand the importance of strength and longevity.

Super
Duty 300M Ball Joints
300M grade steel is the strongest ball
joint material on the market. We took that material and combined it with our
superior design engineering to make the strongest stud possible. That means
minimal narrowing at the neck and an adjustable stud. At 2.25x stronger than
stock, you can’t buy a stronger ball joint than SuperATV’s super duty 300M
ball joint.

Heavy-Duty Ball Joints
Our heavy-
duty ball joints are designed with ultimate performance and convenience in
mind. Whether you’re doing flips or chasing hills, our proprietary blend of
hardened 4340 VAR steel and zinc plating means this ball joint can take it.
Our tests show that our ball joint can take double the pressure of an OEM ball
joint!

NOTE: You must re-use your stock ball joints
if you don’t select preassembly. –>

FEATURE

• Adds 1.5” of forward offset
• Fit up to 29.5” tires
• 1.25” tubing is 25% larger than stock
• Adjustable ball joints for
  full camber adjustability
• Utilizes stock A-arm bushings
• UV-
  resistant powder coat finish
• Easy to install
• Backed by a
  lifetime warranty

<!–

• 1.5″ additional clearance
• Run up to 29.5″ tires with no lift!
• 1.25″ tube – 25% larger than
  OEM
• 1.5″ forward offset
• Full camber adjustability
• Does not include ball joints

–>

Fitment

• Polaris RZR 800 : 2008-2014