Polaris RZR 900 RackBoss 2.0 Rack and Pinion

Description

RackBoss 2.0 Reinvented the Rack
The fate of every rack
is to wear down over time, get sloppy, and make your steering responsiveness
feel terrible. That all changes with RackBoss 2.0. It’s an evolution of our
original RackBoss and designed to be the strongest, most durable rack on the
market. It uses X24 Tech—a dual-bushing design that reduces wear by over 50%
compared to stock. You can’t find that kind of improvement anywhere else. Get
SuperATV’s RackBoss 2.0 Rack and Pinion installed on your Polaris RZR XP 900
so you can turn massive tires on dangerous terrain. No matter how hard or long
you ride, this rack keeps you in control.

Less Wear and Tear
with Our Dual-Bushing Design
What makes RackBoss 2.0 so good at
preventing slop? It’s engineered with X24 Tech—heavy-duty PTFE bushings at
both ends of the rack that remove play from the internals. Reducing play also
keeps the tension spring nearly motionless. With little to no unintended
internal movement, this RZR 900 steering rack can turn massive tires through
heavy rides and hard hits and still stay in like-new condition for years
longer than the next best rack. And with the built-in grease fitting, you can
push fresh grease through after you go deep in mud or water.

Swaged Tube Tie Rods
These steel swaged tube tie rods
are lightweight but super tough. The flared-out, swaged design boosts the
strength of the 7/8” diameter tubing. They’re bolstered with better tie rod
ends too. They have huge 16 mm rack threads and 14 mm rod threads make them
the toughest in the industry. They’ll keep you on track where others fail.

Solid Steel Bar Tie Rods
Our solid steel bar
tie rods are big and beefy for the reliability you need. They’re made with 1”
diameter steel bars that are paired with bigger, better tie rods you’ll
love—3/4” outer heim joint tie rods and rebuildable inner tie rods that use
3/4” rod threads and 16 mm rack threads. Altogether, they’re built for hard
hits, big tires, and wild rides.

Looking for a More
Traditional Rack?
If you don’t need all the benefits of a
RackBoss 2.0, you can dial it back to our original, more traditional RackBoss
1.0. It uses the same beefy housing but doesn’t include the extra PTFE
bushing. Our RackBoss 1.0 Rack and Pinion comes with steel swaged tubes that
are tougher than stock and perfect for casual riders looking for an upgrade.
It’s finished with our tough 14 mm inner and outer tie rod ends so you can
ride harder without worry.

Patent No. 11,345,393

FEATURE

RackBoss 2.0 Features:

• Heavy-duty dual PTFE
  bushings:
• Designed with X24 Tech
• Prevents wear
• Reduces slop
• Improves overall durability
• Available
  tie rod options:
• Steel swaged tube
• Solid steel bar
• Solid steel tie rods use:
• 3/4” outer tie rod ends
• Rebuildable inner tie rod ends that use 3/4” rod threads and 16 mm rack
  threads
• Swaged tube tie rods use:
• 14 mm outer tie
  rod ends
• Inner tie rod ends that use M14 rod threads and 16 mm rack
  threads
• 65% larger housing than stock
• Over 50% less
  wear than OEM after 15,000 cycles
• Grease fitting for rack gears

RackBoss 1.0 Features:

• Uses a
  single PTFE bushing
• 65% larger housing than stock
• Less wear
  than stock
• Uses steel swaged tie rods
• 14 mm inner and outer
  tie rod ends
• Includes all hardware and instructions

Fitment

• Polaris RZR XP 900 : 2011-2014
• Polaris RZR XP 4 900 :
  2012-2014
• Polaris RZR 900 : 2015-2020
• Polaris RZR 900 XC :
  2015-2017
• Polaris RZR 900 Trail : 2015-2020

Replaces OEM Part #: 1824259, 1823993