Polaris Scrambler XP 6" Portal Gear Lift

Description

Gen 3 Portals are Geared for All

This GDP 6” Portal Gear Lift for the Polaris Scrambler gives you a lift and a gear

reduction in one box. Get the clearance to run bigger tires and the torque you

need to turn them. The lift and gear reduction are in the hub which means they

maintain suspension geometry and reduce drivetrain stress. Customize by

choosing between a 30% or 45% gear reduction and selecting a cast or billet

aluminum housing. GDP portals are truly geared for all.

45%–Perfect for Mud

Install big 6”

portals with a 45% gear reduction to get clearance for huge tires and a

massive boost in torque. It’ll turn your monster tires like they’re stock and

take your Scrambler through the biggest, thickest mud holes you can find.

These portals are pure power — and they’re really good at flingin’ mud.

45%–Perfect for Rocks

A 6” portal box with a

45% gear reduction gives you tons of torque to crawl over any rock or boulder

you can find. With that much power, rock shelves will feel like speed bumps

and boulders feel like pebbles. With 6” of clearance, you’ll run bigger tires

and spend less time getting stuck in the rocks.

30%–Perfect for Everything

A 30% gear reduction lets

you turn bigger tires and gives you the versatility to run mud, dominate

trails and hills, and maintain high speed on the road. It gets your power to

the ground to make your ATV more capable on every ride.

Learn more

about how tire size and gear reduction can unleash your machine’s potential.

Better Gears

Our gears are precision

ground and made with 9310 billet steel alloy for high strength and high speed.

That means they’re cool and quiet even when you’re hammering down the throttle

on the road, and they have strength to get you through every nasty mud hole

and rock garden.

Stronger Housings by Design

GDP housings are backed by years of experience—we’ve made thousands of

them. They’re not amature housings, they’re professionally made by us and we

know what we’re doing. So whether you want cast or USA-made billet aluminum,

you won’t find a better quality housing anywhere else.

• Our housings

  are reinforced in all the right places

• They’re built with better oil

  flow and gearing forces in mind

• There are no gimmicks and no vents

  because vents do more harm than good—we know because we tested them

Advanced Gaskets and Seals

Whether you go with

cast or billet, both housings use:

• Advanced gaskets with excellent

  oil resistance and a lower deterioration rate than Kevlar gaskets

• A

  sealed input gear and double-lipped output seal

• 100% sealing coverage

  throughout so you can forget about oil leaks

Top-

Rated Customer Service

Still need a little help getting

exactly what you need? We’ve got a dedicated team just for portal support.

Give us a call so we can get the perfect set of portals in your hands today.

<!—->33″ to 35″6″ Lift Kit30%36″ to 40″6″

Lift Kit45%Gear reductions listed

are general guidelines to maximize torque and maintain factory top speed. A

larger than recommended gear reduction will result in more torque and lower

top speed. Give us a call for more information.

Polaris Scrambler XP 6″ Portal Gear Reduction Recommendations
Tire Size	Required Suspension Setup with 6″ Portals	Recommended 6″ Portal Gear Reduction
Up to 32″	1.5″ Forward Front A Arms	30%

Patent # 11,299,042

FEATURE

• Available with billet or cast aluminum housing
• 9310 alloy

  billet steel precision ground gears are cool and quiet

• Increases

  width by 4 in. per side (8 in. total)

• 1.5 in. diameter 4340 hardened

  steel drive shaft

• No leak bearings and seals
• Universal hub

  fits all major bolt patterns

• Comes complete with all hardware,

  backing plates, brakes lines and instructions

Wheel

Requirements:

• 18” or larger wheel required
• 18”

  wheels cannot exceed 4-1/2” backspacing

• 20” and larger wheels cannot

  exceed 5” backspacing

Fitment

• Polaris Scrambler 1000 MD : 2015
• Polaris Scrambler 1000 XP :

  2014+

• Polaris Scrambler 850 : 2013+

NOTE:

Wheels need to have a center hole of at least 3.25″ (82.55mm) or require a 1”

wheel spacer.