Can-Am Defender Atlas Pro BFT Suspension Kit

Description

Rock 34” Tires with Atlas Pro A-arms
Do you want add
more tire clearance without raising your center of gravity with a big lift? No
problem—SuperATV’s Can-Am Defender Atlas Pro BFT Suspension Kit is just what
you need. With this suspension kit, you can install massive 34” tires and keep
your center of gravity low without adding a heavy lift kit. How’d we do it?
BFT gives you monstrous 2” forward offset Atlas Pro A-arms and a 2” lift in
the form of shock brackets and spring spacers.

Unbeatable
Atlas Pro Tubing
These Atlas Pro A-arms are strongest we’ve ever
made. They’re made with 1.5” diameter wall steel DOM tubing that’s 0.5” larger
than stock and 0.25” larger than our standard high-clearance A-arms. Tougher
than the competition—we fortified their design to address weak spots found on
OEM. The tubing is treated with a UV-resistant powder coating that makes them
super resistant to rust and corrosion.

When it comes to strength, no
detail was spared. The brackets are made with CNC laser-cut steel and the
spring spacers are made from billet aluminum. They give you 1.5” of added
ground clearance, too. Muscular looks, higher clearance, and improved
performance on rough terrain? This suspension kit dominates.

Backed by a Lifetime Warranty
SuperATV’s BFT Suspension
Kit is strong enough to come backed by a lifetime warranty. The 1.5” diameter
wall steel DOM tubing makes our A-arms the most durable and resilient on the
market. Ride your UTV the way you want through monster mud holes and over
ridiculous obstacles and never miss a beat.

We’re so confident that
this suspension will hold strong no matter how hard you push it, we back it up
with a lifetime warranty. So if an arm bends or breaks in a pile up, we’ll
replace it—free of charge, forever. It’s that simple.

Let
SuperATV Do the Work – Preassembly Available!
Purchase a set of
SuperATV ball joints and we will install them for you. You save money and
time. No need to buy a press, or remove your old ball joints, and press them
back in. We’ll do all the work for free!

The best part? This saves
you considerable time and money! And, the labor is on us! We do it because we
want you on the trail, not in the garage.

Choose the Right
Ball Joint
Each Super Duty and Heavy-Duty ball joint comes with
an easily accessible grease zerk and an adjustable steel-on-steel design. You
can easily keep our ball joints maintained and flexible. At SuperATV, we
understand the importance of strength and longevity.

Super
Duty 300M Ball Joints
300M grade steel is the strongest ball
joint material on the market. We took that material and combined it with our
superior design engineering to make the strongest stud possible. That means
minimal narrowing at the neck and an adjustable stud. At 2.25x stronger than
stock, you can’t buy a stronger ball joint than SuperATV’s super duty 300M
ball joint.

Keller Ball Joints
Keller Ball
Joints use a two-piece design that eliminates the need for a snap ring. They
thread onto your A-arms like a nut and bolt, which makes these ball joints
virtually impossible to pull out. The high-quality chromoly steel stud
combined with an advanced tool-steel body makes them perfect for bigger
machines, bigger tires, and bigger rides. And since they’re greaseable and
rebuildable, you can keep them running perfectly.

Heavy-Duty
Ball Joints
Our heavy-duty ball joints are designed with
ultimate performance and convenience in mind. Whether you’re doing flips or
chasing hills, our proprietary blend of hardened 4340 VAR steel and zinc
plating means this ball joint can take it. Our tests show that our ball joint
can take double the pressure of an OEM ball joint!

NOTE: You must re-use your stock ball joints if you don’t
select preassembly.

KIT INCLUDES:

• Upper
  and lower front A-arms
• Steering stop kit
• 17” Limit straps
  (Not needed if running Rhino 2.0 Axles)
• Spring spacers
• Shock
  brackets
• Shock bump stop (Required only for 34” tires)

FEATURE

• Fit 34” tires with minimal lift
• 2” forward offset
  A-arms
• Made with 1.5” x .138” wall steel DOM tubing
• 0.5” larger than stock
• 0.25” larger than our standard High-
  Clearance 2” Offset A-Arms
• 2” of lift
• High-
  clearance—1.5” of additional clearance
• Full camber adjustability
• Pivot blocks pre-adjusted to factory length
• Reinforced shock
  mounts
• Includes all 4 front A-arms
• Can be used with OEM or
  aftermarket ball joints
• UV-Resistant powder coat finish
• Backed by a lifetime warranty!

Fitment

• Can-Am Defender HD 5 : 2017+
• Can-Am Defender HD 5 DPS :
  2017-2019
• Can-Am Defender HD 8 : 2016+
• Can-Am Defender HD 8
  DPS : 2016+
• Can-Am Defender HD 8 XT : 2016+
• Can-Am Defender
  HD 8 XTP : 2018+
• Can-Am Defender HD 10 : 2016-2019
• Can-Am
  Defender HD 10 DPS : 2016-2019
• Can-Am Defender HD 10 XT :
  2016-2019
• Can-Am Defender HD 10 XT Cab : 2016-2017
• Can-Am
  Defender HD 10 XTP : 2018-2019
• Can-Am Defender HD 10 Mossy Oak :
  2018-2019
• Can-Am Defender MAX HD 8 : 2017+
• Can-Am Defender
  MAX HD 8 DPS : 2017+
• Can-Am Defender MAX HD 8 XT : 2017+
• Can-Am Defender MAX HD 10 : 2017-2019
• Can-Am Defender MAX HD 10
  DPS : 2017-2019
• Can-Am Defender MAX HD 10 XT : 2017-2019
• Can-Am Defender MAX HD 10 XT Cab : 2017 Only