DTF Tie Rod Saver Repair Kit

$55.00

Broke a tie rod on the trail? The DTF Tie Rod Saver gets you rolling again in minutes. Slide the sleeve over the break, bolt it down, and drive back to camp — no welding, no special tools. Fits most stock and aftermarket tie rods. Made by DTF Powersports in Pioneer, TN.

Add to wishlist

Description

Broke a Tie Rod? Don’t Walk Home.

A snapped tie rod ends the ride — unless you’ve got a Tie Rod Saver in the toolbox. This is a trailside repair sleeve made by DTF Powersports: slide it over the broken tie rod, tighten the bolts, and you’ve got steering again. It’s a temporary fix that gets you back to camp or the truck under your own power, instead of a tow or a long walk.

How It Works

  1. Pick the sleeve. Choose the adapter sleeve that matches your tie rod diameter.
  2. Slide it on. Slip the main body sleeve over the broken section of tie rod.
  3. Lock it down. Tighten the 1/2″ grub screws — they thread through the welded nuts on the body of the tube and clamp onto the tie rod. No welding, no special tools.
  4. Drive out. Steer gently and get back to camp. Replace the tie rod properly when you’re home.

What’s in the Box

  • 1x main body sleeve (tube with welded nuts)
  • 4x adapter sleeves to fit most tie rods
  • 2x 1/2″ grub screws

Specifications

  • Material: High-quality steel
  • Fitment: Universal — fits most tie rods
  • Adapters included: 4 adapter sleeves
  • Fasteners: 2x 1/2″ grub screws threading through welded nuts on the tube body
  • Installation: Bolt-on, no welding, no special tools
  • Finish: Powder coated black.
  • Use: Temporary trail repair — replace the tie rod properly after the ride

Fitment — Universal

No machine-specific list and no tube measurements — the kit fits by tie rod, not by model. Universal fit for most UTV, ATV, and side-by-side tie rods, with four adapter sleeves included to cover the range.

Commonly used on machines including Polaris RZR, Can-Am Maverick X3, Honda Talon, Kawasaki KRX 1000, Yamaha YXZ, Polaris Ranger, and Can-Am Defender — listed as examples of machines riders use it on, not as a fitment guarantee.

Frequently Asked Questions

Will the Tie Rod Saver fit my machine?

Yes — the fit is universal, not machine-specific. Four adapter sleeves are included to cover most tie rods. If you’re running oversized aftermarket tie rods, check with us first.

Is this a permanent fix?

No. It’s a temporary trail repair. It gets you steering again so you can drive back to camp or the truck. Replace the tie rod properly when you’re home.

What tools do I need on the trail?

A 15mm box-end wrench — that’s what fits the grub screws. No welding, no press, no special tools.

Can I drive normally with it installed?

Drive gently and get back to camp — it’s a repair sleeve, not a new tie rod. Don’t keep riding hard on it.

Does it come in Raw or Black?

Black only — every kit comes powder coated black. There is no Raw option.

How much is it, and how fast does it ship?

$55 each, $10 flat rate shipping, in stock at DTF Powersports, Pioneer, TN.