Can-Am Outlander 5" Lift Kit

Description

Ride Better with a 5” Lift
Get ultimate performance on
your Can-Am Outlander with SuperATV’s 5″ Lift Kit. It gives you all-new
suspension, an extended wheelbase, and tons of room for oversized tires. When
you put this on your quad, you’ll command attention and conquer mud holes and
rough trails effortlessly.

• A true 5” lift
• Fit up to 32”
  tires
• Fit up to 34” tires with SuperATV footwells
• Increases your Renegade’s
  wheelbase by 5.5”
• Includes chromoly steel A-arms and trailing
  arms
• Comes complete with extended Rhino Brand Axles

Do More with Tons of Clearance
Unleash the full
potential of your Can-Am Outlander with SuperATV’s 5″ lift. It gives you a
5.5″ longer wheelbase and 5” of extra ground clearance so you can fit up to
34″ tires when combined with SuperATV footwells. You’ll be bigger, better, and
more badass on every ride.

All-New Beefed-Up
Suspension
A big lift needs to be tough. The A-arms are made
from 1.25″ chromoly steel tubing and the trailing arms are made from 1.5″
chromoly steel tubing to make sure it can handle anything. Hit the throttle
and go hard. This lift is for riding, not just for looking pretty.

Comes with Rhino 2.0 Axles and Heavy-Duty Tie Rods
This
lift kit comes with all the tough components you need, like heavy-duty,
gusseted, Z-bend tie rods and four Rhino 2.0 Axles. These axles are
specifically designed for high articulation use and heavy machines with larger
CVs and shafts. You can go nuts without worrying about them breaking down.

Let SuperATV Do the Work—Preassembly Available!

Want to spend more time on the trails and less time in the garage?
Purchase a set of SuperATV ball joints with your A-arms and we’ll install them
for you for free! We save you money and time so you can get back to doing what
you love.

NOTE: You must re-use your stock ball
joints if you don’t select a pre-installed ball joint at checkout.

Heavy-Duty Ball Joints
Our heavy-duty ball joints are
designed with ultimate performance and convenience in mind. Whether you’re
doing flips or chasing hills, our proprietary blend of hardened 4340 VAR steel
and zinc plating means this ball joint can take it. Our heavy-duty ball joints
also come with easily-accessible grease zerks and an adjustable design.
Extensive lab and field testing shows that our heavy-duty ball joints can
withstand double the pressure of an OEM ball joint!

Super-
Duty 300M Ball Joints
We took the strongest ball joint material
on the market—300M grade steel—and combined it with our superior design
engineering to make the strongest ball joint on the market. It comes with an
easily accessible grease zerk and an adjustable steel-on-steel design, making
it easy to keep your ball joints maintained and flexible. At 2.25x stronger
than stock, you won’t find a better ball joint.

Keller Ball
Joints
Keller Ball Joints use a two-piece design that eliminates
the need for a snap ring. They thread onto your A-arms like a nut and bolt,
which makes these ball joints virtually impossible to pull out. The high-
quality chromoly steel stud combined with an advanced tool-steel body makes
them perfect for bigger machines, bigger tires, and bigger rides. And since
they’re greaseable and rebuildable, you can keep them running perfectly.

Kit Includes:

• Front high-clearance 1.5” offset
  A-arms (chromoly)
• Rear 4” offset trailing arms (chromoly)
• (4) Rhino 2.0 Axles
• Heavy duty Z-bend tie rod kit
• Extended brake lines
• All hardware and installation
  instructions

FEATURE

• Run up to 32” tires
• Run up to 34” tires with SuperATV footwells
• Front A-arms
• 1.25″ thick DOM tubing
• 1.5″ forward
  offset high-clearance
• Heavy-duty Z-bend tie rods
• Rear
  trailing arms
• 4″ rear offset for a smoother ride
• 1.5″
  DOM tubing for extreme strength
• Extended trailing arms include all
  bearings
• (4) Rhino 2.0 Axles, extended length
• 5″
  increased track width

Kit Includes:

• Front high-clearance 1.5” offset A-arms (chromoly)
• Rear 4” offset
  trailing arms (chromoly)
• (4) Rhino 2.0 Axles
• Heavy duty
  Z-bend tie rod kit
• Extended brake lines
• All hardware and
  installation instructions

Fitment

• Can-Am Outlander 570 : 2019+
• Can-Am Outlander 570 XMR :
  2019+
• Can-Am Outlander 650 : 2019+
• Can-Am Outlander 650 DPS
  : 2019+
• Can-Am Outlander 650 Mossy Oak : 2019+
• Can-Am
  Outlander 650 XMR : 2019+
• Can-Am Outlander 650 XT : 2019+
• Can-Am Outlander 850 : 2019+
• Can-Am Outlander 850 DPS :
  2019+
• Can-Am Outlander 850 Mossy Oak : 2019+
• Can-Am
  Outlander 850 XMR : 2019+
• Can-Am Outlander 850 XT : 2019+
• Can-Am Outlander 850 XTP : 2019+
• Can-Am Outlander 1000R :
  2019+
• Can-Am Outlander 1000R DPS : 2019+
• Can-Am Outlander
  1000R XMR : 2019+
• Can-Am Outlander 1000R XT : 2019+
• Can-Am
  Outlander 1000R XTP : 2019+
• Can-Am Outlander 1000R XXC : 2019+
• Can-Am Outlander Max 570 : 2019+
• Can-Am Outlander Max 650 :
  2019+
• Can-Am Outlander Max 650 DPS : 2019+
• Can-Am Outlander
  MAX 650 XMR : 2019+
• Can-Am Outlander Max 650 XT : 2013+
• Can-
  Am Outlander Max 850 : 2016+
• Can-Am Outlander MAX 850 DPS :
  2019+
• Can-Am Outlander MAX 850 XT : 2019+
• Can-Am Outlander
  MAX 850 XTP : 2019+
• Can-Am Outlander Max 1000 : 2012-2018
• Can-Am Outlander MAX 1000R : 2019+
• Can-Am Outlander MAX 1000R DPS
  : 2019+
• Can-Am Outlander MAX 1000R XMR : 2019+
• Can-Am
  Outlander MAX 1000R XT : 2019+
• Can-Am Outlander MAX 1000R XTP :
  2019+
• Can-Am Outlander MAX 1000R XXC : 2019+