Can-Am Maverick Sport Atlas Pro Rear Offset A-Arms

Description

Upgrade Your Stock A-Arms
Are you thinking about heading
out for a weekend of wheelin’ with your buddies? Our Can-Am Maverick Sport
Atlas Pro Rear A-Arms are huge and can take on the roughest terrain. They’re
in a category of their own—they’re 0.5″ larger than your stock A-arms and
0.25″ larger than our standard rear offset A-arms. They’re beefy and
incredibly strong, increasing your clearance and giving your machine that
intimidating look you need. How big is our A-arm tubing? It’s 1.5″ in
diameter, which is huge. And you get a 1.5” rear offset for more stability and
the room to run 31″ tires when paired with a set of our forward offset A-arms.

Bigger and Better with Atlas Pro Tubing
Can
you name one reason you shouldn’t get these bad boys? Yeah, us neither. Thanks
to our clever design, the tubing measures 1.5″ in diameter with walls .183”
thick. This gives you the strength and stability for those hellish rides with
the boys. And if an increase in size wasn’t enough, we’ve powder coated them
for added durability. So get on it, and knock one of your “to-dos” off your
list.

Add More Stability with a Rear Offset
The design of these Can-Am Maverick Sport control arms gives you an additional
1.5” of ground clearance. With increased ground clearance, you can roll over
logs and boulders that used to cause you all sorts of trouble. And they come
with a 1.5″ rear offset, adding length to your wheelbase by moving the ball
joint 1.5″ backward. The offset allows you to run up to 31″ tires without
adding a lift kit. You’ll have your buddies begging you to give them a head
start.

We’re so confident in our A-arms that we’re selling them with
a lifetime warranty. So ride how you want knowing we’ve got your back.

Adjustable Pivot Blocks
Our high-clearance A-arms
also come with adjustable pivot blocks, allowing you to change your camber.
Paying attention to camber is very important when adding a lift kit or larger
tires. You’ll want to adjust it to eliminate premature tire wear. We take it
one step further by pre-adjusting your pivot blocks to match your machine’s
stock specifications, so you don’t have to mess with it if you don’t want to.

FEATURE

• Adds 1.5” of rear offset
• Fit up to 31” tires
• Made
  with 1.5” x .138” wall steel DOM tubing
• 0.5” larger than
  stock
• Adjustable pivot blocks for full camber
  adjustability
• Utilizes stock A-arm bushings
• UV-resistant
  powder coat finish
• Easy to install
• Backed by a lifetime
  warranty

Fitment

• Can-Am Maverick Sport 1000R XRC : 2019+
• Can-Am Maverick
  Sport 1000R XMR: 2019+
• Can-Am Maverick Sport 1000R XXC : 2020+