Description
Bolster Your Suspension
We know what you’re doing with
your Polaris Ranger XP 1000—big tires, a big portal gear lift, and big mud
holes. You want the meanest party wagon you can get, but all that unsprung
weight at your hub means more leverage. More leverage means every mud hole and
rut has the potential to wad up your suspension. Protect your investment and
keep the good times rolling with SuperATV’s Track Bars for the Polaris Ranger
XP 1000. With our track bars installed, you can go for the hard rides your
barrel-club beast was built for.
Double Your Suspension
Strength
Our track bars are made with 1.25” diameter steel
tubing and use heavy-duty heims. We use 1/8” steel plating for our frame mount
to ensure a bulletproof connection point. Altogether, our track bars virtually
double the strength of your front suspension. That means you can hit bigger
bumps with bigger tires and bigger portals without crumpling your A-arms.
Perfect Engineering with Double Axis Technology
Do you know why SuperATV is one of the only companies you can find that
makes track bars, jamb bars, or A-arms support bars? It’s because they’re
really stinking tricky. Without precision placement, you’ll compromise
strength, ground clearance, suspension travel or, worse, all three. We use
Double Axis technology to ensure you get full suspension travel without
binding. They maintain perfect 3-point geometry that gives you maximum
strength and clearance.
We know what we’re doing and we know the
difference between track bars that rock and track bars that suck. Ours rock.
Our clamps are big and beefy—our tests show that they won’t break when
properly installed so there’s no need to weld. And even though they’re big,
our clamps only hang down a couple inches to minimize clearance loss.
How do we do it? The only way you can: with decades of experience that
you can’t fake.
FEATURE
- Virtualy doubles the strength of your front suspension
- Designed for the Ranger XP 1000 6” Lift Kit or 1.5″ Forward
Offset A-Arms. - Bars made of 1.25” diameter steel
- Mounting plate made of 1/8” steel plating
Fitment
For use with SuperATV’s 1.5″ forward offset A-arms or 6″ lift kit for:
- Polaris Ranger XP 1000 : 2018-2020
- Polaris Ranger XP 1000 Crew :
2019-2020 (manufactured after 7-1-2018) - Polaris Ranger XP 1000
Northstar Edition : 2018-2020 - Polaris Ranger XP 1000 Northstar
Edition Crew : 2019-2020 - Polaris Ranger XP 1000 Back Country :
2019 - Polaris Ranger XP 1000 Back Country Crew : 2019
- Polaris
Ranger XP 1000 Texas Edition : 2020 - Polaris Ranger XP 1000 Texas
Edition Crew : 2020 - Polaris Ranger XP 1000 High Lifter :
2019-2020 - Polaris Ranger XP 1000 High Lifter Crew : 2019-2020
Additional information
| Select suspension setup. | 1.5 inch Forward Offset A-Arms, 6 inch suspension lift kit |
|---|
