Polaris RZR Trail S 1000 RackBoss 2.0 Rack and Pinion

Description

RackBoss 2.0 Is in a League of Its Own
Every rack
eventually wears down, gets sloppy, and makes your steering and responsiveness
feel like crap. Or at least every rack did until RackBoss 2.0. It changes all
that because it’s the only rack on the market that uses X24 Tech—our unique
dual-bushing design that reduces wear by over 50% compared to stock. With
SuperATV’s RackBoss 2.0 Rack and Pinion installed on your Polaris RZR Trail S
1000, you can run massive tires and tackle deadly terrain. You can ride the
way you want every day for years and quit worrying about your rack.

Less Wear and Tear with Our Dual-Bushing Design
What
makes RackBoss 2.0 so good at preventing slop? It’s engineered with X24
Tech—heavy-duty PTFE bushings at both ends of the rack that remove play from
the internals. Reducing play also keeps the tension spring nearly motionless.
With little to no unintended internal movement, this rack can turn massive
tires through heavy rides and hard hits and still stay in like-new condition
for years longer than the next best rack. And with the built-in grease
fitting, you can push fresh grease through after you go deep in mud or water.

Solid Steel Bar Tie Rods
Solid steel bar tie
rods give you the robust strength you need to ride through rough terrain.
They’re perfect for turning big tires through slop and navigating boulder
fields. The 1” diameter steel rod is paired with beefy tie rod ends—3/4” outer
tie rods and rebuildable inner tie rods that use 3/4” rod threads and 16 mm
rack threads. All that strength lets you get wild.

Swaged
Tube Tie Rods
These steel swaged tube tie rods are lightweight
but super tough. The flared-out, swaged design boosts the strength of the 7/8”
diameter tubing. They’re bolstered with better tie rod ends too. They have
huge 16 mm rack threads and 14 mm rod threads make them the toughest in the
industry. They’ll keep you on track where others fail.

Looking for a More Traditional Rack?
If you don’t need
all the benefits of a RackBoss 2.0, you can dial it back to our original, more
traditional RackBoss 1.0. It uses the same beefy housing but doesn’t include
the extra PTFE bushing. Our RackBoss 1.0 Rack and Pinion comes with steel
swaged tubes that are tougher than stock and perfect for casual riders looking
for an upgrade. It’s finished with our tough 14 mm inner and outer tie rod
ends so you can ride harder without worry.

Patent No. 11,345,393

FEATURE

RackBoss 2.0 Features:

• Heavy-duty dual PTFE
  bushings:
• Designed with X24 Tech
• Prevents wear
• Reduces slop
• Improves overall durability
• Solid
  steel tie rods use:
• 3/4” outer tie rod ends
• Rebuildable
  inner tie rod ends that use 3/4” rod threads and 16 mm rack threads
• Swaged tube tie rods use:
• 14 mm outer tie rod ends
• Rebuildable inner tie rod ends that use 14 mm rod threads and 16 mm rack
  threads
• 65% larger housing than stock
• Over 50% less
  wear than OEM after 15,000 cycles
• Grease fitting for rack gears

RackBoss 1.0 Features:

• Uses a
  single PTFE bushing
• 65% larger housing than stock
• Less wear
  than stock
• Uses steel swaged tie rods
• 14 mm inner and outer
  tie rod ends
• Includes all hardware and instructions

Fitment

• Polaris RZR Trail S 1000 Premium : 2021+
• Polaris RZR Trail S
  1000 Ultimate : 2021+

Replaces OEM Part # :
1824349 and 1823994