Description
Upgrade Your Stock A-Arms
Here we go—load them up and
head out. It’s time to put dirt under your tires and rip through the trail
with your buddies. Will your stock A-arms hold up against the rough terrain?
We know our Can-Am Commander Atlas Pro Rear A-Arms will. They’re like nothing
you’ve seen before—they’re 0.5″ larger than your stock A-arms and 0.25″ larger
than our standard rear offset A-arms. They’re beefy and incredibly strong,
increasing your clearance and giving your machine that intimidating look you
need. How big is our A-arm tubing? It’s 1.5″ in diameter, which is huge. And
you get a 1.5” rear offset for more stability and the room to run 31″ tires
when paired with a set of our forward offset A-arms.
Bigger
and Better with Atlas Pro Tubing
Go ahead and list all the
things you can do with bigger and stronger A-arms. Now do them. Thanks to our
clever design, the tubing for these bad boys measures 1.5″ in diameter with
walls .183” thick. This gives you the strength and stability for those hellish
rides with the boys. And if an increase in size wasn’t enough, we’ve powder
coated them for added durability. So get on it, and knock one of your “to-dos”
off your list.
Add More Stability with a Rear
Offset
The design of these Can-Am Commander control arms gives
you an additional 1.5” of ground clearance. With increased ground clearance,
you can roll over logs and boulders that used to cause you all sorts of
trouble. And they come with a 1.5″ rear offset, adding length to your
wheelbase by moving the ball joint 1.5″ backward. The offset allows you to run
up to 31″ tires without adding a lift kit. You’ll have your buddies begging
you to give them a head start.
We’re so confident in our A-arms that
we’re selling them with a lifetime warranty. So ride how you want, knowing
we’ve got your back.
Adjustable Pivot Blocks
Our high-clearance A-arms also come with adjustable pivot blocks, allowing you
to change your camber. Paying attention to camber is very important when
adding a lift kit or larger tires. You’ll want to adjust it to eliminate
premature tire wear. We take it one step further by pre-adjusting your pivot
blocks to match your machine’s stock specifications, so you don’t have to mess
with it if you don’t want to.
FEATURE
- Adds 1.5” of rear offset
- Fit up to 31” tires
- Made
with 1.5” x .138” wall steel DOM tubing - 0.5” larger than
stock - Adjustable pivot blocks for full camber
adjustability - Utilizes stock A-arm bushings
- UV-resistant
powder coat finish - Easy to install
- Backed by a lifetime
warranty
Fitment
- Can-Am Commander XT : 2021+
- Can-Am Commander XT-P :
2021+ - Can-Am Commander Max XT : 2021+
