Can-Am Maverick Trail High Clearance 1.5" Forward Offset A-Arms

Description

More Stability and Better Rides
Your Maverick Trail is
rugged and it’s built for the off-road. If you want it to truly handle
everything you encounter, you need to upgrade to SuperATV’s High-Clearance
1.5” Forward Offset A-Arms for the Can-Am Maverick Trail. They’re stronger,
come with full camber adjustment, and increase your wheelbase by 1.5 inches
for more stability and room for up to 30” tires. It’s a win-win.

Bigger Tires and Better Clearance
The 1.5” forward
offset gives you better tire clearance and room for up to 30” tires—all
without a lift! A longer wheelbase also makes you more stable over hills and
large obstacles. They make use of our unique dual-bend design to raise the
profile of these arms so they won’t get hung up on rocks and other trail
obstacles.

Superb Strength
Our beefed up 1.25”
diameter tubing is 25% larger than stock and results in much stronger control
arms. Ride hard and get wild. We want you to test the limits and ride with
confidence. With the strongest suspension you can get, nothing will stop you.

Plus, they’re backed by a lifetime warranty.

Adjustable Pivot Blocks
You get full adjustability
thanks to our adjustable pivot blocks. They come set to stock specifications
right out of the box, so you don’t have have to mess with them if you don’t
want to. But they let you tweak your camber to perfection if you bog down your
suspension with a bunch of cab weight or add a small camber-crippling lift.
You can dial it in so you don’t get any premature tire wear but you do get a
better ride.

Learn more about what camber
is, how it affects your ride, and how to adjust it perfectly. <!– Fit
30” Tires
With a set of SuperATV 1.5” Forward Offset A-Arms
installed on your Can-Am Maverick Trail, you’ll have room for up to 30” tires
without a lift. Our high-clearance A-arms are made with heavy-duty 1.25”
diameter steel tubing. The arched high clearance design gives you 1.5” of
extra ground clearance over stock and the 1.5” forward offset gives you a
longer wheelbase for increased stability, better hill climbs, and better
performance overall.

Chromoly Makes it Stronger

We use chromoly steel for the ball joint housings to ensure that the
most important anchor point on these arms is strong. Hard rides are possible
with more reliable parts, and that means your weekend won’t end early.

Lower Arms Include Uniball Ball Joints
The
lower A-arms in this kit come with SuperATV’s uniball ball joints installed in
adjustable 3/4” x 16 heim joints. The uniball stud is made of chromoly steel
and doesn’t neck down. The result is a stud that’s twice as strong as your
stock stud. It makes your suspension bulletproof.

Let
SuperATV Do the Work – Preassembly Available!
Want more time
on the trails and less time in the garage? Purchase a set of SuperATV ball
joints and we will install them for you. You save money and time. No need to
buy a press, or remove your old ball joints, and press them back in. We’ll do
all the work for free!

The best part? This saves you
considerable time and money! And, the labor is on us! We do it because we want
you on the trail, not in the garage.

Choose the Right
Ball Joint
Each Super Duty and Heavy-Duty ball joint comes
with an easily accessible grease zerk and an adjustable steel on steel design.
You can easily keep our ball joints maintained and flexible. At SuperATV, we
understand the importance of strength and longevity.

Super Duty 300M Ball Joints
300M grade steel is the
strongest ball joint material on the market. We took that material and
combined it with our superior design engineering to make the strongest stud
possible. That means minimal narrowing at the neck and an adjustable stud. At
2.25x stronger than stock, you can’t buy a stronger ball joint than SuperATV’s
super duty 300M ball joint.

Heavy-Duty Ball
Joints
Our heavy-duty ball joints are designed with ultimate
performance and convenience in mind. Whether you’re doing flips or chasing
hills, our proprietary blend of hardened 4340 VAR steel and zinc plating means
this ball joint can take it. Our tests show that our ball joint can take
double the pressure of an OEM ball joint!

NOTE:
You must re-use your stock ball joints if you don’t select preassembly. –>

FEATURE

• 1.5” forward offset
• Fit up to a 30” tire (up from 26”
  stock)
• Made with 1.25” diameter steel tubing
• 1.5” of extra
  ground clearance w/ no lift
• Chromoly steel ball joint housings
• Utilizes stock A-arm bushings
• Lower arms include uniball ball
  joints
• UV-resistant powder coat finish
• Backed by a lifetime
  warranty!

Fitment

• Can Am Maverick Trail 700 : 2022+
• Can Am Maverick Trail 700
  DPS : 2022+
• Can Am Maverick Trail 800 : 2018-2021
• Can Am
  Maverick Trail 800 DPS : 2018-2021
• Can Am Maverick Trail 1000 :
  2018+
• Can Am Maverick Trail 1000 DPS : 2018+

NOTE:

• Wheels with 5+2 offset or greater require 1” wheel spacers.
• Machines built after 01/18/2021 will need SATV part #AAB-CA-MAVS-001
  in order to install this kit.