Description
Gen 3 Portals are Geared for All
SuperATV’s GDP 4”
Portal Gear Lift for the Arctic Cat Prowler is Geared for All. Choose from 15%
or 30% gear reductions and cast or billet aluminum housings so you can
optimize to fit your style.
Perfect for Mud
Move up to a 30% gear reduction for the ultimate mudding experience. That
boost in torque means your tires keep turning through the thickest peanut
butter mud. With 4” of lift, you have room for bigger tires which means more
grip and more rip. It’s the Prowler Party Wagon. When your done with the mud,
a 30% gear reduction can get you through rocks, roads, and trails just as
easily.
Perfect for Rocks
Put 4” portals
and a 30% gear reduction on your machine and get the torque you need crawl
over rocks like they’re not even there. You’ll have the clearance to get over
anything without scratching up your skid plate, and you’ll have room to run
bigger tires. These portals are built for boulders.
Perfect for Trails
Get 4” portals and a 15% gear
reduction on your machine and take on the trail less traveled. Bumps, rocks,
ditches, and logs are no match for your boosted torque, and you can still fly
when the trail is easy. It brings out your UTV’s true power.
Perfect for Work
With 4” portals and a 15% gear
reduction on your Prowler, you’ll have clearance to get over the ditches and
debris around your property and you’ll have the gear reduction to push through
ruts and ditches easily all while towing a trailer full of tools. Plus, you’ll
still have enough speed to cruise down the road.
Learn more
about how tire size and gear reduction can unleash your machine’s potential.
Better Gears
Our gears are precision
ground gears are made with billet 9310 steel alloy for high strength and high
speed. That means they’re cool and quiet even when you’re hammering down the
throttle on the road. With fully sealed cast or billet aluminum boxes, nothing
gets in or out, so your gears stay pristine for years.
Stronger Housings by Design
Try as you might, you
won’t find housings stronger than what we use on our GDP portals. Our housings
are smarter, stronger, and more reliable by design. So whether you choose cast
or USA-made and CNC-machined 6061 billet aluminum, you’re getting housings
that offer unmatched strength and dependability. We’ve got the experience and
the riders on the trail to back it up.
- Our housings are reinforced in
all the right places - They’re built with better oil flow and gearing
forces in mind - There are no gimmicks and no vents because vents do
more harm than good—we know because we tested them
Advanced Gaskets and Seals
Whether you go with cast or
billet, both housings use:
- Advanced gaskets with excellent oil
resistance and a lower deterioration rate than Kevlar gaskets - A
sealed input gear and double-lipped output seal - 100% sealing coverage
throughout so you can forget about oil leaks
Top-
Rated Customer Service
Still need a little help getting
exactly what you need? We’ve got a dedicated team just for portal support.
Give us a call so we can get the perfect set of portals in your hands today.
| Arctic Cat Prowler Portal Gear Reduction Recommendations |
||
|---|---|---|
| Tire Size |
Required Suspension Setup with 4″ Portals | Recommended 4″ Portal Gear Reduction |
| Up to 27″ | Stock | 15% |
| Up to 27″ | 2″ Lift Kit | 15% | Gear reductions listed are general guidelines to maintain factory top speed. Installing a larger than recommended gear reduction will result in extra torque and lower top speed. Give us a call for more information. |
Patent # 11,299,042
FEATURE
- Available with billet or cast aluminum housing
- Cool, quiet,
precision ground gears made from 9310 alloy billet steel - Increases
width by 4 in. per side (8 in. total) - 1.5 in. diameter 4340 hardened
steel drive shaft - No leak bearings and seals
- Universal hub
fits all major bolt patterns - Comes complete with all hardware,
backing plates, brakes lines and instructions
Wheel
Requirements:
- 14” or larger wheel required
- Wheels
cannot exceed 5” backspacing - Not compatible with dual beadlock
wheels
Fitment
- Arctic Cat Prowler 500 HD : 2014-2015
- Arctic Cat Prowler 550
XT : 2010-2015 - Arctic Cat Prowler 700 XTX : 2010-2014
- Arctic
Cat Prowler 700 HDX : 2012-2014 - Arctic Cat Prowler 700 HDX Crew :
2017 - Arctic Cat Prowler 700 XT : 2015-2017
- Arctic Cat
Prowler 1000 XT : 2015-2017 - Arctic Cat Prowler 1000 XTZ :
2009-2014 - Arctic Cat Prowler 1000 H2 : 2011
- Arctic Cat
Prowler 1000 XTZ : 2009-2014
NOTE: Wheels need to
have a center hole of at least 3.25″ (82.55mm) or require a 1” wheel spacer.
Additional information
| Model | Crew Cab, Standard |
|---|---|
| Portal Housing Material | Billet, Cast |
| Portal Gear Reduction | 15%, 30% |
